上海城区交通干道黑碳污染调查

采用设置在上海市中心城区交通主干道旁空气质量自动监测站2018年1—12月的观测数据,分析黑碳气溶胶(BC)污染特征及其与PM_(2.5)、SO_2、NO_x、CO、O_3、苯、甲苯、乙苯、二甲苯和气象参数的相关性。结果表明,观测期间内,BC小时均值为(3 038±22) ng/m~3,ρ(BC)在ρ(PM_(2. 5))中占比为(11. 48±0. 12)%。日内ρ(BC)变化呈双峰型,各月份之间ρ(BC)变化不大。ρ(BC)与风速呈负相关,与PM_(2. 5)、NO_x、CO、苯、甲苯、乙苯和二甲苯呈正相关。     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

国家生态环境监测“十四五”展望

"十四五"时期,生态文明改革持续深入,生态环境治理将向精准治污、科学治污、依法治污转变,这对加快推进生态环境监测体系与监测能力现代化提出了迫切要求。因此,本文从网络建设、体制机制、服务效能等方面,对生态环境监测所取得的进展与成效进行了系统分析,并对国家生态环境监测面临的机遇与挑战进行了深入剖析。在此基础上,针对支撑评价排名、服务精准治污、有序衔接新职能、建设大数据平台、强化数据应用、深化综合评价、理顺体制机制、推动产学研用、提升基础能力等方面,提出了"十四五"期间国家生态环境监测发展的相关建议。     

农地整治权属调整中农户认知对行为响应的作用机制--基于改进TPB及多群组SEM

农地整治权属调整是实现农业规模化和现代化的重要手段,而农户有效参与是推动权属调整的内在动力,研究农地整治权属调整中农户认知对其行为响应的作用机制,有助于高效引导农户参与权属调整,并为制定农地整治权属调整的政策提供科学依据。基于改进计划行为理论和湖北省11个县(市、区)1044份农户抽样调查数据,采用多群组结构方程模型探究了农地整治权属调整中不同类型农户认知对其行为响应的作用机制。结果表明:农地整治权属调整中农户行为逻辑符合改进计划行为理论,农户的行为态度、主观规范、知觉行为控制交互影响行为意愿,进而转换为行为响应,政府支持在行为意愿和行为响应之间起到部分中介作用。总体上,农户行为响应是"自发性""诱发性"和"约束性"三重行动逻辑的结合,且"自发性"占主导地位。多群组结构方程估计结果表明,纯农型与兼业Ⅰ型农户的行为响应受到"自发性""诱发性"和"约束性"三重影响,兼业Ⅱ型农户受到"自发性"和"诱发性"双重影响,非农型农户仅受到"诱发性"单一影响。因此,为引导农户积极参与农地整治权属调整,应该分别针对各类农户相应地提高其参与的"自发性"和"诱发性",降低"约束性",充分发挥农村社会经济组织的作用,将四种不同类型农户的利益需求统筹考虑,降低权属调整过程中利益协调难度。     

时间因素对钻屑瓦斯解吸指标K1值测定的影响分析

针对时间因素对钻屑瓦斯解吸指标K1测定结果的影响，采用恒温瓦斯放散试验深入分析钻屑瓦斯解吸指标K1测定理论的准确性，总结因时间因素导致K1值测定误差所带来的现场问题。研究结果表明:K1值的测定误差与时间关系密切，测定启动时间越晚，误差越大；测定启动时间由第1 min延后至第2 min，绝对误差和相对误差最大值分别增加0.081 cm3/(g·min1/2)和2.20%；高瓦斯压力条件矿井或煤层的局部高瓦斯压力区域、构造煤发育区的钻屑瓦斯解吸指标K1值测定结果偏低，测定误差偏大。研究结果可为煤与瓦斯突出预测水平的提升提供技术支撑。     

近距煤层无煤柱协调开采布局研究与应用*

为了解决老母矿近距煤层的开采难题,通过理论分析并利用FLAC 3D数值模拟软件进行模拟,分析出煤层前后推进150 m是最合理的步距，侧向采动支撑压力在15~50 m内存在影响。基于这些理论数据，确定回采巷道的合理位置,进而确定以内错距离范围为30~60 m的内错式布置方式布置巷道和无煤柱协调开采布局，并进行井下工程应用。最后把无煤柱协调开采布局与双巷掘进开采布局对比，得出无煤柱协调开采布局的先进性和优势，研究结果可为同类条件下的工程应用提供借鉴。     

铁路职工健康维护工作初探

从健康意识逐渐提高、健康知识不断增加、健康生活方式逐步建立及健康状况有所改善等方面阐述铁路实施健康行动计划后取得的成效,分析健康维护中存在的主要问题,即专业人员不足、服务方式较单一及高血压控制率有待提高,进而提出加强专业队伍建设、引进研发新设备、强化铁路健康教育及深化“四高”联防联控等进一步开展健康维护工作的建议。     

张家港河凤凰段水质达标整治方案研究

张家港河凤凰段位于张家港市凤凰镇,受上游、支流水质以及区域生活污染源等影响,河道出入境断面水质达标率较低,主要超标因子为氨氮和总磷。本文通过水质现状分析和现场调研,总结了水质难达标的主要原因,提出了针对性较强的水质提升整治方案,对改善张家港河水环境具有非常重要的意义。     

石油化工催化剂生产过程中的职业病防治及应急处理

石化企业使用了大量的催化剂,催化剂开发、生产过程复杂,有许多原料和生产工艺,存在许多潜在的安全隐患和职业病危害因素。为预防催化剂生产过程中的事故,通过分析催化剂生产过程中的职业病危害分析,提出了相应的职业病防范及应急处置措施,加强催化剂生产过程中的职业病防治和应急处置能力,创造良好的经济、生态和社会效益,有效防止催化剂生产过程中发生安全事故和职业病。     

Utilization of MSWI fly ash as partial cement or sand substitute with focus on cementing efficiency and health risk assessment

• Washed MSWI fly ash was used as partial cement or sand substitute. • Sand replacing is beneficial for strength, while cement replacement reduces strength. • Cementing efficiency factor and mortar pore structure explain the strength results. • Health risk assessment was conducted for MSWI fly ash blended cement mortar. • CR and HI contributed by different exposures and heavy metals were analyzed. The strength of cement substituted mortar decreases with the increase in fly ash amount, whereas the strength increases when the fly ash is blended as sand substitute. A mortar with highest strength (compressive strength= 30.2 Mpa; flexural strength= 7.0 Mpa) was obtained when the sand replacement ratio was 0.75%. The k value (cementing efficiency) of fly ash varied between 0.36 and 0.15 for the fly ash fraction in binder between 5% and 25%. The k values of fly ash used for sand replacement were all significantly above that used for cement substitution. The macropores assigned to the gaps between particles decreased when the fly ash was used as sand replacement, providing an explanation for the strength enhancement. The waste-extraction procedure (toxicity-sulphuric acid and nitric acid method (HJ/T 299-2007)) was used to evaluate metal leaching, indicating the reuse possibility of fly ash blended mortar. For the mortar with the mass ratio of fly ash to binder of 0.5%, the carcinogenic risks (CR) and non-carcinogenic hazard quotient (HQ) in sensitive scenario for blended mortar utilization were 9.66 × 10^-7 and 0.06, respectively; these results were both lower than the threshold values, showing an acceptable health risk. The CR (9.89 × 10^-5) and HQ (3.89) of the non-sensitive scenario for fly ash treatment exceeded the acceptable threshold values, indicating health risks to onsite workers. The main contributor to the carcinogenic and non-carcinogenic risk is Cr and Cd, respectively. The CR and HQ from inhalation was the main route of heavy metal exposure.